picture1
AMPLIFIER

MAXX-ON AMPLIFIERS COMES WITH STERLING QUALITY WITHOUT ANY COMPROMISE & ARE USED IN PLACES OF
WORSHIP, AIRPORT CONVENTIONS, STADIUMS, PUBLIC GATHERINGS, SHOPPING MALLS, SCHOOLS AND COLLEGES.

READ MORE

picture2
MICROPHONE

MICROPHONES ARE MOST IMPORTANT PART OF PUBLIC ADDRESS SYSTEMS
WHICH ARE USED FOR EACH AND EVERY APPLICATIONS AND PROGRAMMES.

READ MORE

picture2
SPEAKER

SPEAKERS HAVE THE MAIN RESPONSIBILITY TO REPRODUCE ELECTRICAL SOUND SIGNAL IN EFFECTIVE MANNER.
MAXX-ON SPEAKERS ARE DESIGNED FOR EXCELLENT SOUND REPRODUCTION UNDER ALL CONDITIONS.

READ MORE

Our Products


  • SSA-250 is a multi application high Power PA Amplifier capable of delivering 250 Watts, ideally suited for a wide variety of music and public address applications. This amplifier is designed to give high power, clean sound and reliable, trouble free operation under extreme climatic & weather conditions. Features include 6 Mic inputs, 2 Aux inputs, cut / boost type bass & treble controls, resettable circuit protector, and provision for connecting 24V battery. Facility is given for mixing MP3 playback signal with both Aux and most Mic inputs.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
    • Line Input for connecting the output from any external mixer or permitting SSA-250 to be used as a Booster Power Amplifier.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Instant transfer to DC power (Car Battery) if AC power fails.
    • Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.

    SPECIFICATIONS:

    Power Output 300W Max., 250W RMS at 10% THD, 220W RMS at 5% THD, 200W RMS at 2% THD
    Input Channels 6 x Mic 0.8mV/4.7kΩ, 2 x Aux 100mV/470kΩ, 1 x Line 1V/50kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3Db
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 500VA DC: 6A
    Dimension W450 x H160 x D340 mm

     

  • TZA-7000DP is a multi application high power PA Amplifier with an inbuilt MP3 Digital Player. With a rated power handling capacity of 700 Watts (350 Watts power from each zone) it is an ideal music system for large PA Installations involving multiple speakers. This amplifier is designed to give high power, clean sound, and reliable, trouble free operation under extreme climatic & weather conditions. The high quality inbuilt MP3 player comes with backlit LCD display, a remote, and useful features like “Random Play” and repetition of only selected songs. Provision has been given for mixing MP3 music with various mic inputs, thus making this model ideally suited for DJs and other PA music programmes.

    FEATURES:-

    • 6 Mic, 2 Aux and 1 CD input. Separate level control for MP3 Digital Player.
    • Stereo Music Operation for DJ programmes.
    • Built-in MP3 player with USB, SD, MMC card reader & FM Player. Remote control provided for ease of operation.
    • Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
    • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
    • Cut / boost type Bass & Treble controls.
    • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Provision for operation on AC mains as well as 36V DC battery.
    • Bar Graph Signal Display.

    Specification:
    Power Output 500W + 500W Max., 350W + 350W RMS at 10% THD,
    300W + 300 RMS at 5% THD, 280W + 280W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
    DigitaL Player MP3 Player with Remote Control (USB, SD and MMC Card Reader & FM Player)
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 36V (3x12V Car Battery)
    Power Consumption AC: 1100VA DC: 13A
    Dimension
  • TZA-5000DP is a multi application 2-Zone PA Amplifier capable of delivering 250+250 Watts output. Ideal for PA Installations in mosque, temples and other religious places, as well as for other indoor and outdoor sound reinforcement applications. This amplifier has a built-in MP3 player with USB, SD and MMC card reader, which is ideal for DJ’s and stereo music applications for various gatherings. This amplifier is designed to give clean sound and reliable, trouble free operation under severe climatic conditions. Features includes 6 Mics, 2 Aux. Inputs and RCA jacks at rear for CD/DVD players. In addition, resettable circuit protector, ±10dB Cut/Boost Bass and Treble Controls and AC/24 Volts Battery operation are provided.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • ‘Stereo’ Music Operation for DJ programmes.
    • Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
    • Built-in MP3 player with USB, SD and MMC card reader. Remote control provided for ease of operation.
    • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
    • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Instant transfer to DC power (Car Battery) if AC power fails.
    • Bar Graph Signal Display.

    Specification:
    Power Output 350W + 350W Max., 250W + 250W RMS at 10% THD,
    220W + 220 RMS at 5% THD, 200W + 200W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
    DigitaL Player MP3 Player with Remote Control (USB, SD and MMC Card Reader & FM Player)
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 1000VA DC: 12A
    Dimension W510 × H172 × D385 mm
  • TZA-4000DP is a multi application 2-Zone PA Amplifier capable of delivering 200+200 Watts output. Ideal for PA Installations in mosque, temples and other religious places, as well as for other indoor and outdoor sound reinforcement applications. This amplifier has a built-in MP3 player with USB, SD and MMC card reader, which is ideal for DJ’s and stereo music applications for various gatherings. This amplifier is designed to give clean sound and reliable, trouble free operation under severe climatic conditions. Features includes 6 Mics, 2 Aux. Inputs and RCA jacks at rear for CD/DVD players. In addition, resettable circuit protector, ±10dB Cut/Boost Bass and Treble Controls and AC/24 Volts Battery operation are provided.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • ‘Stereo’ Music Operation for DJ programmes.
    • Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
    • Built-in MP3 player with USB, SD and MMC card reader. Remote control provided for ease of operation.
    • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
    • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Instant transfer to DC power (Car Battery) if AC power fails.
    • Bar Graph Signal Display.

    Specification:
     

    Power Output 300W + 300W Max., 200W + 200W RMS at 10% THD,
    180W + 180 RMS at 5% THD, 165W + 165W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
    DigitaL Player MP3 Player with Remote Control (USB, SD and MMC Card Reader & FM Player)
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 700VA DC: 9A
    Dimension  –
  • TZA-2000DP is ideal for medium sized installations such as in places of worship where two separate groups of speakers are needed to be connected. This amplifier has a built-in MP3 player with USB, SD and MMC card reader. In addition, ±10dB Cut/Boost Bass and Treble Controls and Stereo music operation, connecting of two separate groups of speakers, line inputs & outputs, preamplifier outputs, zone On/Off facility, DC fuses at rear panel, AC/DC operation have been provided.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • Stereo music operation, connecting of two separate groups of speakers, line inputs & outputs, preamplifier outputs, zone On/Off facility, DC fuses at rear panel, AC/DC operation have been provided.
    • Built-in MP3 player with USB, SD and MMC card reader. Remote control provided for ease of operation.
    • User has a choice to connect both the zones to 100V (LMT) type speakers, or 100V speakers to one zone and low impedance type speakers to the other zone. Both the zones can also be connected to low impedance type speakers.

    Specification:
     

    Power Output 130W + 130W Max., 100W + 100W RMS at 10% THD,
    90W + 90W RMS at 5% THD, 80W + 80W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ
    DigitaL Player MP3 Player with Remote Control (USB, SD and MMC Card Reader & FM Player)
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 450VA DC: 6.5A
    Dimension W500 × H140 × D340 mm
  • TZA-2000E is ideal for medium sized installations such as in places of worship where two separate groups of speakers are needed to be connected. This amplifier has a built-in Digital Echo facility on all inputs providing Echo… Reverb… Chorus… Effects. In addition, ±10dB Cut/Boost Bass and Treble Controls and Stereo music operation, connecting of two separate groups of speakers, line inputs & outputs, preamplifier outputs, zone On/Off facility, DC fuses at rear panel, AC/DC operation have been provided.

    FEATURES:-

    • 5 Mic & 2 Aux Inputs.
    • Stereo music operation, connecting of two separate groups of speakers, line inputs & outputs, preamplifier outputs, zone On/Off facility, DC fuses at rear panel, AC/DC operation have been provided.
    • Echo facility on all inputs through Echo Delay & Repeat controls providing Echo… Reverb… Chorus… Effects.
    • User has a choice to connect both the zones to 100V (LMT) type speakers, or 100V speakers to one zone and low impedance type speakers to the other zone. Both the zones can also be connected to low impedance type speakers.

    Specification:
     

    Echo Reverb System Digital Signal Processing
    Power Output 130W + 130W Max., 100W + 100W RMS at 10% THD,
    90W + 90W RMS at 5% THD, 80W + 80W RMS at 2% THD
    Input Channels Mono 5 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 450VA DC: 6.5A
    Dimension W500 × H140 × D340 mm
  • TZA-1500E is suitable for small sized installations such as in places of worship where both external and internal speakers are required to be connected with different sound level settings. This amplifier has a built-in Digital Echo facility on all inputs providing Echo… Reverb… Chorus… Effects. User has a choice to connect both the zones to 100V (LMT) type speakers, or 100V speakers to one zone and low impedance type speakers to the other zone. Both the zones can also be connected to low impedance type speakers.

    FEATURES:-

    • TZA-1500E permits connecting 100V (LMT) type speakers to one Zone and low impedance type speakers to other Zone without causing overloading and overheating.
    • 5 Mic & 2 Aux Inputs.
    • Echo facility on all inputs through Echo Delay & Repeat controls providing Echo… Reverb… Chorus… Effects.
    • Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.
    • Preamplifier output for connecting to a Booster Amplifier and for recording the programme.
    • Bass & Treble Controls.
    • Instant transfer to DC power (Car Battery) if AC power fails.

    Specification:
     

    Echo Reverb System Digital Signal Processing
    Power Output 100W + 100W Max., 80W + 80W RMS at 10% THD,
    70W + 70W RMS at 5% THD, 60W + 60W RMS at 2% THD
    Input Channels 5 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3Db
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω
    Speaker Outputs 4Ω, 8Ω, 16Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60Hz DC: 12V (12V Car Battery)
    Power Consumption AC: 300VA DC: 6A
    Dimension W460 × H155 × D310 mm
  • TZA-1200E is suitable for small sized installations such as in places of worship where both external and internal speakers are required to be connected with different sound level settings. This amplifier has a built-in Digital Echo facility on all inputs providing Echo… Reverb… Chorus… Effects. User has a choice to connect both the zones to 100V (LMT) type speakers, or 100V speakers to one zone and low impedance type speakers to the other zone. Both the zones can also be connected to low impedance type speakers.

    FEATURES:-

    • 4 Mic & 2 Aux Inputs.
    • Connecting two groups of speakers, preamplifier output, bass and treble controls, zone On/Off facility, AC/DC operation have been provided.
    • Echo facility on all inputs through Echo Delay & Repeat controls providing Echo… Reverb… Chorus… Effects.
    • Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.
    • Instant transfer to DC power (Car Battery) if AC power fails.

    Specification:
     

    Echo Reverb System Digital Signal Processing
    Power Output 90W + 90W Max., 60W + 60W RMS at 10% THD,
    55W + 55W RMS at 5% THD, 50W + 50W RMS at 2% THD
    Input Channels 4 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω
    Speaker Outputs 4Ω, 8Ω, 16Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60Hz DC: 12V (12V Car Battery)
    Power Consumption AC: 250VA DC: 5A
    Dimension W400 × H130 × D290 mm
  • TZA-5000E is a multi application 2-Zone PA Amplifier capable of delivering 200+200 Watts output. Ideal for PA Installations in mosque, temples and other religious places, as well as for other indoor and outdoor sound reinforcement applications. This amplifier has a built-in Digital Echo facility on all inputs providing Echo… Reverb… Chorus… Effects, which is ideal for DJ’s and stereo music applications for various gatherings. This amplifier is designed to give clean sound and reliable, trouble free operation under severe climatic conditions. Features includes 6 Mics, 2 Aux. Inputs and RCA jacks at rear for CD/DVD players. In addition, resettable circuit protector, ±10dB Cut/Boost Bass and Treble Controls and AC/24 Volts Battery operation are provided.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • ‘Stereo’ Music Operation for DJ programmes.
    • Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
    • Echo facility on all inputs through Echo Delay & Repeat controls providing Echo… Reverb… Chorus… Effects.
    • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
    • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Instant transfer to DC power (Car Battery) if AC power fails.
    • Bar Graph Signal Display.

    Specification:
    Echo Reverb System Digital Signal Processing
    Power Output 350W + 350W Max., 250W + 250W RMS at 10% THD,
    220W + 220 RMS at 5% THD, 200W + 200W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 1000VA DC: 12A
    Dimension W510 × H172 × D385 mm
  • TZA-4000E is a multi application 2-Zone PA Amplifier capable of delivering 200+200 Watts output. Ideal for PA Installations in mosque, temples and other religious places, as well as for other indoor and outdoor sound reinforcement applications. This amplifier has a built-in Digital Echo facility on all inputs providing Echo… Reverb… Chorus… Effects, which is ideal for DJ’s and stereo music applications for various gatherings. This amplifier is designed to give clean sound and reliable, trouble free operation under severe climatic conditions. Features includes 6 Mics, 2 Aux. Inputs and RCA jacks at rear for CD/DVD players. In addition, resettable circuit protector, ±10dB Cut/Boost Bass and Treble Controls and AC/24 Volts Battery operation are provided.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • ‘Stereo’ Music Operation for DJ programmes.
    • Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
    • Echo facility on all inputs through Echo Delay & Repeat controls providing Echo… Reverb… Chorus… Effects.
    • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
    • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Instant transfer to DC power (Car Battery) if AC power fails.
    • Bar Graph Signal Display.

    Specification:
     

    Echo Reverb System Digital Signal Processing
    Power Output 300W + 300W Max., 200W + 200W RMS at 10% THD,
    180W + 180 RMS at 5% THD, 165W + 165W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 700VA DC: 9A
    Dimension W510 × H172 × D385 mm
  • TZA-7000 is built for the toughest tours and high-profile installations, this amplifiers deliver superb concert sound in a rugged package that stands up to the rigors of the road. High-power designs drive your boxes as hard as you need to get full, clear coverage. Ideal for multi-speaker installations where a user needs to separately set power levels for two separate areas such as indoors & outdoors.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • ‘Stereo’ Music Operation for DJ programmes.
    • Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
    • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
    • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Instant transfer to DC power (Car Battery) if AC power fails.
    • Bar Graph Signal Display.

    Specification:
     

    Power Output 500W + 500W Max., 350W + 350W RMS at 10% THD,
    300W + 300 RMS at 5% THD, 280W + 280W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 50-15,000Hz ±3dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 36V (3x12V Car Battery)
    Power Consumption AC: 1100VA DC: 13A
    Dimension
  • TZA-5000 is built for the toughest tours and high-profile installations, this amplifiers deliver superb concert sound in a rugged package that stands up to the rigors of the road. High-power designs drive your boxes as hard as you need to get full, clear coverage. Ideal for multi-speaker installations where a user needs to separately set power levels for two separate areas such as indoors & outdoors.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • ‘Stereo’ Music Operation for DJ programmes.
    • Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
    • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
    • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Instant transfer to DC power (Car Battery) if AC power fails.
    • Bar Graph Signal Display.
    Specification: 

    Power Output 350W + 350W Max., 250W + 250W RMS at 10% THD,
    220W + 220 RMS at 5% THD, 200W + 200W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 1000VA DC: 12A
    Dimension
  • TZA-4000 is deliver superb concert sound in a rugged package that stands up to the rigors of the road. High-power designs drive your boxes as hard as you need to get full, clear coverage. Ideal for multi-speaker installations where a user needs to separately set power levels for two separate areas such as indoors & outdoors.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • ‘Stereo’ Music Operation for DJ programmes.
    • Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
    • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
    • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Instant transfer to DC power (Car Battery) if AC power fails.
    • Bar Graph Signal Display.
    Specification: 

    Power Output 300W + 300W Max., 200W + 200W RMS at 10% THD,
    180W + 180 RMS at 5% THD, 165W + 165W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 700VA DC: 9A
    Dimension W510 × H172 × D385 mm
  • TZA-2000 is ideal for medium sized installations such as in places of worship where two separate groups of speakers are needed to be connected. User has a choice to connect both the zones to 100V (LMT) type speakers, or 100V speakers to one zone and low impedance type speakers to the other zone. Both the zones can also be connected to low impedance type speakers.

    FEATURES:-

    • 6 Mic & 2 Aux Inputs.
    • ‘Stereo’ Music Operation for DJ programmes.
    • Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
    • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
    • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
    • Resettable circuit breaker for protection against overload and short circuit.
    • Instant transfer to DC power (Car Battery) if AC power fails.

    Specification:
     

    Power Output 130W + 130W Max., 100W + 100W RMS at 10% THD,
    90W + 90W RMS at 5% THD, 80W + 80W RMS at 2% THD
    Input Channels Mono 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ,
    Stereo L/R 200mV/100kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60 Hz DC: 24V (2x12V Car Battery)
    Power Consumption AC: 450VA DC: 6.5A
    Dimension W500 × H140 × D340 mm
  • TZA-1500 is suitable for small sized installations such as in places of worship where both external and internal speakers are required to be connected with different sound level settings. User has a choice to connect both the zones to 100V (LMT) type speakers, or 100V speakers to one zone and low impedance type speakers to the other zone. Both the zones can also be connected to low impedance type speakers.

    FEATURES:-

    • TZA-1500 permits connecting 100V (LMT) type speakers to one Zone and low impedance type speakers to other Zone without causing overloading and overheating.
    • 6 Mic & 2 Aux Inputs.
    • Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.
    • Preamplifier output for connecting to a Booster Amplifier and for recording the programme.
    • Bass & Treble Controls.
    • Instant transfer to DC power (Car Battery) if AC power fails.
    Specification: 

    Power Output 100W + 100W Max., 80W + 80W RMS at 10% THD,
    70W + 70W RMS at 5% THD, 60W + 60W RMS at 2% THD
    Input Channels 6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω
    Speaker Outputs 4Ω, 8Ω, 16Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60Hz DC: 12V (12V Car Battery)
    Power Consumption AC: 300VA DC: 6A
    Dimension W460 × H155 × D310 mm
  • TZA-1200 is suitable for small sized installations such as in places of worship where both external and internal speakers are required to be connected with different sound level settings. User has a choice to connect both the zones to 100V (LMT) type speakers, or 100V speakers to one zone and low impedance type speakers to the other zone. Both the zones can also be connected to low impedance type speakers.

    FEATURES:-

    • 5 Mic & 2 Aux Inputs.
    • Connecting two groups of speakers, preamplifier output, bass and treble controls, zone On/Off facility, AC/DC operation have been provided.
    • Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.
    • Instant transfer to DC power (Car Battery) if AC power fails.

    Specification:

    Power Output 90W + 90W Max., 60W + 60W RMS at 10% THD,
    55W + 55W RMS at 5% THD, 50W + 50W RMS at 2% THD
    Input Channels 5 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω
    Speaker Outputs 4Ω, 8Ω, 16Ω, 70V & 100V for each zone
    Power Supply AC: 220-240V 50/60Hz DC: 12V (12V Car Battery)
    Power Consumption AC: 250VA DC: 5A
    Dimension W400 × H130 × D290 mm
  • SSB-120E is a PA mixer amplifier of rated output 120 watts with Digital Echo. The Digital Echo feature adds color to vocal & musical instruments. SSB-120E has all the other features like 5 Mic inputs, 2 Aux inputs, cut / boost type bass & treble controls, and provision for connecting 12V battery. This is a rugged and highly reliable product, ideally suited for a wide variety of music and public address applications.

    FEATURES:-

    • 5 Mic & 2 Aux Inputs.
    • Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
    • Echo facility on all inputs through Echo repeat & delay controls providing Echo… Reverb… Chorus… Effect
    • Line Input for connecting the output from any external mixer or permitting SSB-120E to be used as a Booster Power Amplifier.
    • Cut and Boost type Bass & Treble controls.
    • 5 LED array for output level monitoring.
    • Provision for instant transfer to DC power (Car Battery) if AC power fails.
    Specification: 

    Delay Time 60ms to 600ms
    Echo Reverb System Digital Signal Processing
    Power Output 160W Max., 120W RMS at 10% THD, 105W RMS at 5% THD, 95W RMS at 2% THD
    Input Channels 5 x Mic 0.65mV/4.7kΩ, 2 x Aux 100mV/470kΩ, 1 x Line 1V/20kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω, Line 1V/1kΩ
    Speaker Outputs 4Ω, 8Ω, 16Ω, 70V & 100V
    Power Supply AC: 220-240V 50/60 Hz DC: 12V (12V Car Battery)
    Power Consumption AC: 250VA DC: 5.5A
    Dimension W420 × H135 × D290 mm
  • SSB-80E is a PA mixer amplifier of rated output 80 watts with Digital Echo. The Digital Echo feature adds color to vocal & musical instruments. This, combined with 5 microphone inputs, 2 Aux input, and provision for multiple speaker connections makes this ideally suitable for a variety of music programmes and public address applications.

    FEATURES:-

    • 5 Mic & 2 Aux Inputs.
    • Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.
    • Echo facility on all inputs through Echo repeat & delay controls providing Echo… Reverb… Chorus… Effect
    • Cut and Boost type Bass & Treble controls.
    • 5 LED array for output level monitoring.
    • Provision for instant transfer to DC power (Car Battery) if AC power fails.

    Specification:
     

    Delay Time 60ms to 600ms
    Echo Reverb System Digital Signal Processing
    Power Output 110W Max., 80W RMS at 10% THD, 75W RMS at 5% THD, 60W RMS at 2% THD
    Input Channels 5 x Mic 0.65mV/4.7kΩ, 2 x Aux 100mV/470kΩ
    Output Regulation ≤2 dB, no load to full load at 1kHz
    Frequency Response 50-15,000Hz ±3dB
    Signal To Noise Ratio 60dB
    Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
    Outputs Preamp 200mV/600Ω
    Speaker Outputs 4Ω, 8Ω, 16Ω, 70V & 100V
    Power Supply AC: 220-240V 50/60 Hz DC: 12V (12V Car Battery)
    Power Consumption AC: 180VA DC: 3A
    Dimension W355 × H135 × D290 mm

Translate »